FV2090 Vertical Machining Center

 

   

Vertical Machining Center - FV2090 - The FV2090 Vertical Machining Center offers CAT 50, 6,000 rpm, 30/35 hp torque two speed gearhead spindles.
The FV2090 combination box way Vertical Machining Center offers CAT 50, 6,000 rpm, 30/35 hp torque two speed gearhead spindles.

 Table:
Table size 84.6 x 35.4 in (2150 x 900 mm)
T-Slot size .866 in x 6.9 in x 5 (22 mm x 175 mm x 5)
Max load 4840 lbs (2200 kg)

Travel: 
X (left & right) 78.7 in (2000 mm)
Y (in & out) 35.4 in (900 mm)
Z (up & down) 35.4 in (900 mm)
Spindle nose to table 7.8 - 43.3 in (200 - 1100 mm)

Spindle: 
Spindle speed 15~6000 RPM
Spindle motor (cont./30 min rating)
Gear Type
30 / 35 hp (22 / 26 kW)
Spindle taper CAT 50

Feedrate: 
Rapid feedrate X / Y / Z 787 / 787 / 708 ipm (20 / 20 / 18 m/min)
Cutting feedrate (max) 708 ipm (18 m/min)

Accuracy: 
Repeatability (JIS) ± 0.0001 in (± 0.003 mm)
Positioning (JIS) ± 0.0002 in (± 0.005 mm)

Tool Magazine: 
Magazine capacity 30 std (40 opt)
Max diameter (with tool in adj. socket) 5.0 in (127 mm)
Max diameter (without tool in adj. socket) 9.0 in (229 mm)
Max length 11.8 in (300 mm)
Max weight 33 lb  (15 kg)


Other: 
Power 220 V (50 KVA)
Air 100 psi
Machine height 142.5 in (3620 mm)
Floorspace (L x W)

255.1 x 194.8 in (6480 x 4948 mm)
Weight 50600 lbs (23000 kg)

Specifications subject to change.