FH400J Horizontal Machining Center

Horizontal Machining Center - FH400J - This economical Horizontal Machining Center is our smallest yet. The FH400J delivers high speed machining in a compact footprint.

This economical Horizontal Machining Center is our smallest yet. The FH400J delivers high speed machining in a compact footprint.

 Work Area: 
Axis travel X (column) 23.6 in (600 mm)
Axis travel Y (spindle head) 22.0 in (560 mm)
Axis travel Z (table) 24.8 in (630 mm)
Spindle nose to rotary table center 3.9 - 28.7 in (100 - 730 mm)
Spindle nose to top face of pallet 2.0 - 24.0 in (50 - 610 mm)
Workpiece swing ø24.8 x 35.4 in (ø630 x 900 mm)


Spindle: 
Speed (infinitely variable) 50 - 15,000 rpm
Drive motor power AC 30 hp (22 kw) for 15 min.
AC 25 hp (18.5 kw) continuous
Spindle nose taper ISO R297 #40
Spindle diameter (front bearing ID) ø3.15 in (ø80 mm)
Coolant through the spindle Standard

Pallets:
Pallet size 15.75 x 15.75 in (400 x 400 mm)
Pallet height from floor 43.3 in (1100 mm)
NC Table (4th Axis) 360,000 Position
Indexing time, 90 degrees 2.3 sec
Rotary Table Indexing Angle .001° NC
Pallet changing time 7.5 sec
Max load on pallet 880 lb (400 kg)

Control:
GE Fanuc 16i MB / Fanuc 32i

Tool Magazine: 
Standard storage capacity 40
Tool selection Fixed Pocket, Random Access
Maximum tool weight 17.6 lb (8 kg)
Maximum tool size
(diameter x length)		 ø2.8 x 15.7 in (ø70 x 400 mm)
Tool change time, tool-to-tool .9 sec
Tool change time, chip-to-chip 2.4 sec
Type of tool CAT 40

Feed: 
Rapid traverse (X, Y and Z) 2362 ipm (60 m/min)
Cutting feedrate 2362 ipm (60 m/min)
Acceleration 1 G (X,Z) / 0.7G (Y)

Accuracy:
Linear positioning accuracy ± 0.00012 in (0.003 mm) full stroke
Linear repeatability ± 0.00006 in (0.0015 mm)
Table index accuracy ± 7 arc sec

Machine Size: 
Machine height 108.3 in (2750 mm)
Floorspace 82.7 x 150.8 in (2100 x 3830 mm)
Net weight 24250 lb (11000 kg)

Specifications subject to change.