| Axis travel X (column) |
29.5 in (750 mm) |
| Axis travel Y (spindle head) |
31.5 in (800 mm) |
| Axis travel Z (table) |
33.5 in (850 mm) |
| Spindle nose to rotary table
center |
5.9 - 39.4 in (150 - 1000 mm) |
| Spindle nose to top face of pallet |
2.0 - 33.5 in (50 - 850 mm) |
| Workpiece swing |
ø33.5 x 46.0 in (ø850 x 1168
mm) |
| Speed (infinitely variable) |
6000 rpm (opt 50 - 15000 rpm) |
| Drive motor power |
40 hp (30 kw) interim
30 hp (22 kw) continuous
(opt 33.5 hp (25 kw) continuous) |
| Spindle nose taper |
#50 |
| Spindle diameter (front bearing
ID) |
ø4.33 in (ø110 mm) |
| Pallet size |
21.65 x 21.65 in (550 x 550 mm)
(opt 19.69 x 19.69 in (500 x 500mm)) |
| Pallet height from floor |
47.24 in (1200 mm) |
| Rotary table index increments |
1 deg (0.001 NC opt) |
| Indexing time, 90 degrees |
2 sec |
| Indexing time, 180 degrees |
2.4 sec |
| Pallet changing time |
9.5 sec |
| Max load on pallet |
1760 lb (800 kg) |
| Standard storage capacity |
60 std; Opt 121, 180, 308, 451 |
| Tool selection |
Fixed pocket, random access |
| Maximum tool weight |
59.5 lb (27 kg) |
Maximum tool size
(diameter x length) |
ø8.5 x 18.5 in (ø216 x
470 mm)
T-Bar ø14.96 in (ø380 mm) |
| Tool change time, tool-to-tool |
3 - 4.3 sec |
| Tool change time, chip-to-chip |
5 - 6.3 sec |
| Rapid traverse (X, Y and Z) |
1890 ipm (48 m/min) |
| Cutting feedrate |
0.04 - 1889 ipm (0.001 - 48 m/min) |
| Acceleration |
0.5 G |
| Linear positioning accuracy |
± 0.00012 in (0.003 mm) full stroke |
| Linear repeatability |
± 0.00008 in (0.002 mm) |
| Rotary table index accuracy |
± 3 arc sec |
| Machine height |
122.0 in (3100 mm) |
| Floorspace |
282.0 x 117.7 in (7162 x 2990 mm) |
| Net weight |
39600 lb (18000 kg) |
| ©Toyoda Machinery USA | (847) 253-0340