| Axis travel X (column) |
29.5 in (750 mm) |
| Axis travel Y (spindle head) |
31.5 in (800 mm) |
| Axis travel Z (table) |
33.5 in (850 mm) |
| Spindle nose to rotary table
center |
5.9 - 39.4 in (150 - 1000 mm) |
| Spindle nose to top face of pallet |
3.94 - 35.43 in (100 - 900 mm) |
| Workpiece swing |
ø33.46 x 46.0 in (ø850 x 1168
mm) |
| Speed (infinitely variable) |
50 - 15000 rpm |
| Drive motor power |
30 hp (22 kw) interim
(opt 40 hp (30 kw) interim)
25 hp (18.5 kw) continuous
(opt 30 hp (22 kw) continuous) |
| Spindle nose taper |
#50 or #40 |
| Spindle diameter (front bearing
ID) |
ø3.54 in (ø90 mm) #50
ø3.15 in (ø80 mm) #40 |
| Pallet size |
21.65 x 21.65 in (550 x 550 mm) |
| Pallet height from floor |
47.24 in (1200 mm) |
| Rotary table index increments |
1 deg (0.001 NC opt) |
| Indexing time, 90 degrees |
2 sec |
| Indexing time, 180 degrees |
2.6 sec |
| Pallet changing time |
9.5 sec |
| Max load on pallet |
1760 lb (800 kg) |
| Standard storage capacity |
60 std; Opt 121, 280, 494 |
| Tool selection |
Fixed pocket, random access |
| Maximum tool weight |
59.4 lb (27 kg) #50
17.6 lbs (8 kg) #40 |
Maximum tool size
(diameter x length) |
ø4.72 x 18.5 in (ø120 x
470 mm) |
| Tool change time, tool-to-tool |
2.7 sec #50 (1.9 sec #40) |
| Tool change time, chip-to-chip |
3.7 - 5 sec #50 (2.7 sec #40) |
| Rapid traverse (X, Y and Z) |
2362 ipm (60 m/min) |
| Cutting feedrate |
2362 ipm (60 m/min) |
| Acceleration |
1 G |
| Linear positioning accuracy |
± 0.00012 in (0.003 mm) full stroke |
| Linear repeatability |
± 0.00008 in (0.002 mm) |
| Rotary table index accuracy |
± 3 arc sec |
| Machine height |
122 in (3100 mm) |
| Floorspace |
118.0 x 283.0 in (2997 x 7188 mm) |
| Net weight |
35200 lb (16000 kg) |
| ©Toyoda Machinery USA | (847) 253-0340