| Axis travel X (column) |
29.53 in (750 mm) |
| Axis travel Y (spindle head) |
31.5 in (800 mm) |
| Axis travel Z (table) |
33.46 in (850 mm) |
| Spindle nose to rotary table
center |
5.9 - 39.37 in (150 - 1,000 mm) |
| Spindle nose to top face of pallet |
3.94 - 35.43 in (100 - 900 mm) |
| Workpiece swing |
ø33.46 x 46.0 in (ø850 x 1,168
mm) |
| Speed (infinitely variable) |
6,000 rpm (opt 50 - 15,000 rpm) |
| Drive motor power |
40 hp (30 kw) interim
30 hp (22 kw) continuous
(opt 33.5 hp (25 kw) continuous) |
| Spindle nose taper |
#50 |
| Spindle diameter (front bearing
ID) |
ø4.33 in (ø110 mm) |
| Pallet size |
21.65 x 21.65 in (550 x 550 mm) |
| Pallet height
from floor |
47.24 in (1,200 mm) |
| Rotary table index increments |
1 deg (0.001 NC opt) |
| Indexing time, 90 degrees |
2 sec |
| Indexing time, 180 degrees |
2.4 sec |
| Pallet changing
time |
9.5 sec |
| Max load on pallet |
1,760 lb (800 kg) |
| Standard storage capacity |
60 std; Opt 121; 134 - 326 |
| Tool selection |
Fixed pocket, random access |
| Maximum tool weight |
59.5 lb (27 kg) |
Maximum tool size
(diameter x length) |
ø4.72 x 21.5 in (ø120 x
545 mm) |
| Tool change time, tool-to-tool |
2 - 3.3 sec |
| Tool change time, chip-to-chip |
3.7 - 5 sec |
| Rapid traverse (X, Y and Z) |
2,362 ipm (60 m/min) |
| Cutting feedrate |
0.04 - 2,362 ipm (0.001 - 60 m/min) |
| Acceleration |
0.7 G |
| Linear positioning accuracy |
± 0.00012 in (0.003 mm) full stroke |
| Linear repeatability |
± 0.00008 in (0.002 mm) |
| Rotary table index accuracy |
± 3 arc sec |
| Machine height |
126 in (3,200 mm) |
| Floorspace |
281 x 123 in (7,132 x 3,120 mm) |
| Net weight |
41,000 lb (18,600 kg) |
