| Axis travel X (column) |
29.5 in (750 mm) |
| Axis travel Y (spindle head) |
31.5 in (800 mm) |
| Axis travel Z (table) |
33.5 in (850 mm) |
| Spindle nose to rotary table
center |
5.9 - 39.37 in (150 - 1000 mm) |
| Spindle nose to top face of pallet |
3.94 - 35.43 in (100 - 900 mm) |
| Workpiece swing |
ø33.5 x 39.4 in (ø850 x 1000
mm) |
| Speed (infinitely variable) |
6000 rpm (opt 50 - 15000 rpm) |
| Drive motor power |
40 hp (30 kw) interim
30 hp (22 kw) continuous
(opt 33.5 hp (25 kw) continuous) |
| Spindle nose taper |
#50 |
| Spindle diameter (front bearing
ID) |
ø4.33 in (ø110 mm) |
| Pallet size |
21.65 x 21.65 in (550 x 550 mm) |
| Pallet height
from floor |
47.24 in (1200 mm) |
| Rotary table index increments |
0.001 NC |
| Indexing time, 90 degrees |
2 sec |
| Indexing time, 180 degrees |
2.4 sec |
| Pallet changing
time |
9.5 sec |
| Max load on pallet |
1760 lb (800 kg) |
| Standard storage capacity |
60 std; Opt 121, 180, 200, 308, 451 |
| Tool selection |
Fixed pocket, random access |
| Maximum tool weight |
59.5 lb (27 kg) |
Maximum tool size
(diameter x length) |
ø4.72 (ø9.84 Cylindrical tool, adjacent pockets empty, ø12.59 Boring tool, adjacent pockets empty) x 21.5 in (ø120 x
545 mm) |
| Tool change time, tool-to-tool |
2 - 3.3 sec |
| Tool change time, chip-to-chip |
3.7 - 5 sec |
| Rapid traverse (X, Y and Z) |
2362 ipm (60 m/min) |
| Cutting feedrate |
0.04 - 2362 ipm (0.001 - 60 m/min) |
| Acceleration |
0.7 G ( X & Y), 1.0 G (Z) |
| Linear positioning accuracy |
± 0.00012 in (0.003 mm) full stroke |
| Linear repeatability |
± 0.00008 in (0.002 mm) |
| Rotary table index accuracy |
± 7 sec of arc, ±3.5 arc sec reapeatability |
| Machine height |
124.4 in (3160 mm) |
| Floorspace |
259.8 x 130.3 in (6600 x 3312 mm) |
| Net weight |
41000 lb (18600 kg) |
| ©Toyoda Machinery USA | (847) 253-0340