FH60 remanufactured Horizontal Machining Center

Toyoda's Remanufactured Horizontal Machining Center - FH60

Toyoda's Remanufactured Horizontal Machining Center- FH60

Machine built in 1992.

Standard Equipment:

Automatic Spindle Orientation

Automatic Spindle Air Blow Off

Hydraulic Power Unit

Spindle Speed Tachometer

Spindle Load Meter

Cycle-end Alarm Lamp

Integral Automatic Centralized Lubricator

Chip Conveyor- Spiral Type in Bed, High-rise Dump

Installation Accessories (Leveling Hardware)

Automatic Pallet Changer with Two Pallets

Coolant Unit: 79 gal (300 Liters)

Totally Enclosed Splash Guard

Lighting Unit

96 Position Tool Storage Magazine

9 Station Vertical Pallet Pool with 8 T-Slot Pallets

Rigid Tapping

142 PSI Coolant through Spindle

Overhead Coolant Shower

 


   Axis Travels:
Work Table Lateral Travel (X) 39.4 in (1000 mm)
Spindle Head Vertical Travel (Y) 31.5 in (800 mm)
Column Cross Travel (Z) 29.5 in (750 mm)
Spindle nose to rotary table center 6.9 - 36.4 in (175 - 925 mm)
Spindle Centerline to Top Face 0 - 31.5 in (0 - 800 mm)

Table:
Pallet Size 24.8 x 24.8 in (630 x 630 mm)
Rotary Index Table Increments 1 degree
Pallet Height from Floor 43.3 in (1100 mm)

Feedrates:

Rapid Traverses (X,Y,Z) 591 ipm (15 m/min)
Cutting Feedrate .04 - 212.6 ipm (1 - 5400 m/min)

Control:
FANUC 15MA

Spindle:
Spindle Speed 15 - 5000 rpm
Spindle Diameter (front bearing ID) 3.9 in (100 mm)

ATC:
Max Tool Size (Dia. x lenght) 4.7 x 15.7 in (120 x 400 mm)
Max Tool Weight 44 lb (20 kg)
Tool Change Cycle Time (tool-to-tool) 7 sec

Accuracy & Capability:
Linear positioning accuracy ± 0.0002 in (0.005 mm)
Linear repeatability ± 0.00008 in (0.002 mm)
Rotary table index accuracy ± 3 arc sec

Motors:
Spindle Drive Motor

AC 20 hp (15 kW)/30
AC 15 hp (11 kW)/cont.
Hydraulic Power Unit Pump Motors 4.9 hp (3.7 kW)

Tank, Air & Power Capacity:

Hydraulic Oil 52 gal (200 lit)
Lubrication Oil Spindlehead: 4.7 gal (18 lit)
Air Source Pressure 70 psi/21 cfm
Power Capacity 57 kVA

Specifications are listed as original factory specifications and may slightly differ at this time.

Specifications subject to change.

Interested?

Call Tim Leoni at 847-253-0340