| Axis travel X (column) |
39.37 in (1,000 mm) |
| Axis travel Y (spindle head) |
31.5 in (800 mm) |
| Axis travel Z (table) |
33.46 in (850 mm) |
| Spindle nose to rotary table
center |
7.87 - 41.34 in (200 - 1,050 mm) |
| Spindle nose to top face of pallet |
3.94 - 35.4 in (100 - 900 mm) |
| Workpiece swing |
ø39.37 x 46.0 in (ø1,000 x
1,168 mm) |
| Speed (infinitely variable) |
6,000 rpm (opt 50 - 15,000 rpm) |
| Drive motor power |
40 hp (30 kw) interim
30 hp (22 kw) continuous
(opt 33.5 hp (25 kw) continuous) |
| Spindle nose taper |
#50 |
| Spindle diameter (front bearing
ID) |
ø4.33 in (ø110 mm) |
| Pallet size |
24.8 x 24.8 in (630 x 630 mm) |
| Pallet height from floor |
47.24 in (1,200 mm) |
| Rotary table index increments |
1 deg (0.001 NC opt) |
| Indexing time, 90 degrees |
2 sec |
| Indexing time, 180 degrees |
2.4 sec |
| Pallet changing time |
12 sec |
| Max load on pallet |
2,200 lb (1,000 kg)
(opt 2,646 lb (1,200 kg)) |
| Standard storage capacity |
60 std; Opt 121; 134 - 326 |
| Tool selection |
Fixed pocket, random access |
| Maximum tool weight |
59.5 lb (27 kg) |
Maximum tool size
(diameter x length) |
ø4.72 x 18.5 in (ø120 x
470 mm)
T-Bar ø14.96 in (ø380 mm) |
| Tool change time, tool-to-tool |
3 - 4.3 sec |
| Tool change time, chip-to-chip |
5 - 6.3 sec |
| Rapid traverse (X, Y and Z) |
1,889 ipm (48 m/min) |
| Cutting feedrate |
0.04 - 1,889 ipm (0.001 - 48 m/min) |
| Acceleration |
0.5 G |
| Linear positioning accuracy |
± 0.00012 in (0.003 mm) full stroke |
| Linear repeatability |
± 0.00006 in (0.0015 mm) |
| Rotary table index accuracy |
± 3 arc sec |
| Machine height |
122 in (3,100 mm) |
| Floorspace |
275 x 133 in (6,990 x 3,380 mm) |
| Net weight |
44,092 lb (20,000 kg) |
