| Axis travel X (column) |
39.37 in (1000 mm) |
| Axis travel Y (spindle head) |
31.5 in (800 mm) |
| Axis travel Z (table) |
33.46 in (850 mm) |
| Spindle nose to rotary table
center |
7.87 - 41.34 in (200 - 1050 mm) |
| Spindle nose to top face of pallet |
3.94 - 35.43 in (100 - 900 mm) |
| Workpiece swing |
ø39.37 x 39.37 in (ø1000 x
1100 mm) |
| Speed (infinitely variable) |
50 - 15000 rpm |
| Drive motor power |
30 hp (22 kw) interim
(opt 40 hp (30 kw) interim)
25 hp (18.5 kw) continuous
(opt 30 hp (22 kw) continuous) |
| Spindle nose taper |
#50 |
| Spindle diameter (front bearing
ID) |
ø3.54 in (ø90 mm) |
| Pallet size |
24.8 x 24.8 in (630 x 630 mm) |
| Pallet height from floor |
47.24 in (1200 mm) |
| Rotary table index increments |
0.001 NC |
| Indexing time, 90 degrees |
3.5 sec |
| Indexing time, 180 degrees |
3.9 sec |
| Pallet changing time |
15 sec |
| Max load on pallet |
2640 lb (1200 kg) |
| Standard storage capacity |
60 std; Opt 121, 180, 308, 451 |
| Tool selection |
Fixed pocket, random access |
| Maximum tool weight |
59.5 lb (27 kg) |
Maximum tool size
(diameter x length) |
ø4.72 (ø9.84 cylindrical tool with adjacent pockets empty, ø12.6 boring tool, with adjacent pockets empty) x 18.5 in (ø120 x
470 mm) |
| Tool change time, tool-to-tool |
2 - 3.3 sec (1.3 sec #40) |
| Tool change time, chip-to-chip |
3.7 - 5 sec (2.7 sec #40) |
| Rapid traverse (X, Y and Z) |
2362 ipm (60 m/min) |
| Cutting feedrate |
0.04 - 2362 ipm (0.001 - 60 m/min) |
| Acceleration |
.7 G |
| Linear positioning accuracy |
± 0.00012 in (0.003 mm) full stroke |
| Linear repeatability |
± 0.00008 in (0.002 mm) |
| Rotary table index accuracy |
± 7 sec of arc, ±3.5 arc sec repeatability |
| Machine height |
117.5 in (2985 mm) |
| Floorspace |
128 x 274 in (3240 x 6952 mm) |
| Net weight |
39600 lb (18000 kg) |
| ©Toyoda Machinery USA | (847) 253-0340