| Axis travel X (column) |
39.37 in (1000 mm) |
| Axis travel Y (spindle head) |
31.5 in (800 mm) |
| Axis travel Z (table) |
33.46 in (850 mm) |
| Spindle nose to rotary table
center |
7.87 - 41.34 in (200 - 1050 mm) |
| Spindle nose to top face of pallet |
3.94 - 35.43 in (100 - 900 mm) |
| Workpiece swing |
ø39.37 x 46.0 in (ø1000 x
1168 mm) |
| Speed (infinitely variable) |
6000 rpm (opt 50 - 15000 rpm) |
| Drive motor power |
40 hp (30 kw) interim
30 hp (22 kw) continuous
(opt 33.5 hp (25 kw) continuous) |
| Spindle nose taper |
#50 |
| Spindle diameter (front bearing
ID) |
ø4.33 in (ø110 mm) |
| Pallet size |
24.8 x 24.8 in (630 x 630 mm) |
| Pallet height from floor |
47.24 in (1200 mm) |
| Rotary table index increments |
0.001 NC |
| Indexing time, 90 degrees |
3.5 sec |
| Indexing time, 180 degrees |
3.9 sec |
| Pallet changing time |
15 sec |
| Max load on pallet |
2,640 lb (1,200 kg) |
| Standard storage capacity |
60 std; Opt 121, 180, 200, 308, 451 |
| Tool selection |
Fixed pocket, random access |
| Maximum tool weight |
59.5 lb (27 kg) |
Maximum tool size
(diameter x length) |
ø4.72 x 21.5 in (ø120 x
545 mm) Cylindrical ø9.84 in (250 mm)
T-bar ø12.59 in (320 mm) |
| Tool change time, tool-to-tool |
2 - 3.3 sec |
| Tool change time, chip-to-chip |
3.7 - 5 sec |
| Rapid traverse (X, Y and Z) |
2362 ipm (60 m/min) |
| Cutting feedrate |
0.04 - 2362 ipm (0.001 - 60 m/min) |
| Acceleration |
0.7 G |
| Linear positioning accuracy |
± 0.00012 in (0.003 mm) full stroke |
| Linear repeatability |
± 0.00008 in (0.002 mm) |
| Rotary table index accuracy |
± 7 sec of arc, ± 3.5 arc sec repeat. |
| Machine height |
124.4 in (3160 mm) |
| Floorspace |
281 x 141 in (7126 x 3576 mm) |
| Net weight |
45400 lb (20636 kg) |