Toyoda Machinery | Machine Specials | Recoditioned HMC FH80

Toyoda's Reconditioned Horizontal Machining Center - FH80

Toyoda's Reconditioned Horizontal Machining Center- FH80

Machine built in 1991.

Standard Equipment:

Automatic Spindle Orientation

Automatic Spindle Air Blow Off

Hydraulic Power Unit

Spindle Speed Tachometer

Spindle Load Meter

Cycle-end Alarm Lamp

Integral Automatic Centralized Lubricator

Dual Auger Chip Removal

Installation Accessories (Leveling Hardware)

Automatic Pallet Changer with Two Pallets

Coolant Unit: 79 gal (300 Liters)

Totally Enclosed Splash Guard

Lighting Unit

Fanuc 15MA Control

120 Tool Storage Magazine

Overhead Coolant Shower

1056 ft part program storage

48 fixture offsets

Axis Travels:

Work Table Lateral Travel (X)	47.2 in (1200 mm)
Spindle Head Vertical Travel (Y)	39.4 in (1000 mm)
Column Cross Travel (Z)	35.4 in (900 mm)
Spindle nose to rotary table center	7.9 - 43.3 in (200 - 1100 mm)
Spindle Centerline to Top Face	0 - 39.4 in (0 - 1000 mm)

Table:

Pallet Size	31.5 x 31.5 in (800 x 800 mm)
Rotary Index Table Increments	1 degree
Pallet Height from Floor	43.3 in (1100 mm)

Feedrates:

Rapid Traverses (X,Y,Z)	591 ipm (15 m/min)
Cutting Feedrate	.04 - 212.6 ipm (1 - 5400 m/min)

Control:

FANUC 15MA

Spindle:

Spindle Speed	15 - 4500 rpm
Spindle Diameter (front bearing ID)	4.3 in (110 mm)

ATC:

Max Tool Size (Dia. x lenght)	4.7 x 19.7 in (120 x 500 mm)
Max Tool Weight	55 lb (25 kg)
Tool Change Cycle Time (tool-to-tool)	7 sec

Accuracy & Capability:

Linear positioning accuracy	± 0.00027 in (0.007 mm)
Linear repeatability	± 0.0001 in (0.003 mm)
Rotary table index accuracy	± 3 arc sec

Motors:

Spindle Drive Motor	AC 25 hp (18.5 kW)/30 AC 20 hp (15 kW)/cont.
Hydraulic Power Unit Pump Motors	4.9 hp (3.7 kW)

Tank, Air & Power Capacity:

Specifications are listed as original factory specifications and may slightly differ at this time.

Specifications subject to change.

Interested?

Call Tim Leoni at 847-253-0340