FV1365 Vertical Machining Center

 

   

Vertical Machining Center - FV1365 - The FV1365 Vertical Machining Center comes standard with a 25 hp, gear-driven, 8,000 rpm temperature-controlled spindle that delivers 337 lb-ft.
The FV1365 Vertical Machining Center comes standard with a 25 hp, gear-driven, 8,000 rpm temperature-controlled spindle that delivers 337 lb-ft.

 

.

 Table:
  CAT 40  | CAT 50
Table size 57.1 x 25.6 in (1450 x 650 mm)
Table height 35.4 in (900 mm)
Max load 2866 lbs (1300 kg)

Travel: 
X (left & right) 51.2 in (1300 mm)
Y (in & out) 25.6 in (650 mm)
Z (up & down) 23.6 in (600 mm)
Spindle nose to table 4.9 - 28.5 in (125 - 725 mm)
Spindle center to column 27.4 in (695 mm)

Spindle: 
Spindle speed 15~8000 RPM / 15 - 6000 RPM
Spindle motor (cont./30 min. rating)
Gear Type
CAT 40: 20 / 25 hp (15 / 18.5 kW)
CAT 50: 20 / 25 hp (15 / 18.5 kW)
Spindle taper CAT 40 / CAT 50

Feedrate: 
Rapid feedrate X / Y / Z 1181 / 1181 / 945 ipm (30 / 30 / 24 m/min)
Cutting feedrate (max) 945 ipm (24 m/min)

Accuracy: 
Repeatability (JIS) ± 0.0001 in (± 0.003 mm)
Positioning (JIS) ± 0.0002 in (± 0.005 mm)

Tool Magazine: 
Magazine capacity 32 std / 30 std (40 opt)
Max diameter (with tool in adj. socket) 2.99 / 5.0 in (76 / 127 mm)
Max diameter (without tool in adj. socket) 5.0 / 9.0 in (127 / 229 mm)
Max length 9.8 / 11.8 in  (250 / 300 mm)
Max weight 15.5 / 33 lbs  (7 / 15 kg)


Other: 
Power 220 v (35 KVA)
Air 100 psi
Machine height 115.7 in (2940 mm)
Floorspace (L x W)

186.5 x 160.2 in (4738 x 4068 mm)
Weight 16755 lbs (7600 kg)

Specifications subject to change.