FV850S High Speed Vertical Machining Center

 

   

High Speed Vertical Machining Center - FV850S - The FV850S Vertical Machining Center comes standard with a 20/25 hp, 15,000 rpm sprindle.
The FV850S linear roller guide way Vertical Machining Center comes standard with a 20/25 hp, 15,000 rpm sprindle.

 Table:
Table size (L x W) 39.4 x 20.1 in (1000 x 510 mm)
Table load (max.) 1100 lbs (500 kg)
T- Slot dimensions 0.71 in x 3.94 in x 5 (18 mm x 100 mm x 5)
Distance from table to floor 37 in (940 mm)

Travel: 
X (left & right) 31.5 in (800 mm)
Y (in & out) 20.1 in (510 mm)
Z (up & down) 20.1 in (510 mm)
Spindle nose to table 4.92 - 25.1 in (125 ~ 635 mm)
Spindle center to Z-axis 22.8 in (580 mm)

Spindle: 
Spindle speed 20 ~ 15000 rpm
Spindle motor 20 / 25 hp (15 / 18.5 kW)
Cont./30 min.
Spindle taper CAT 40

Feedrate: 
Rapid feedrate X / Y / Z 1890 / 1890 / 1417 ipm (48 / 48 / 36 m/min)
Cutting feedrate 1417 ipm (36 m/min)

Accuracy: 
Repeatability (JIS) ± 0.0001 in (± 0.003 mm)
Positioning (JIS) ± 0.0002 in (± 0.005 mm)

Tool Magazine: 
Magazine capacity 32 std (40 opt)
Max diameter (with tool / without tool in adj. socket) 2.99 / 5.0 in (76 / 127 mm)
Max length 9.8 in (250 mm)
Max weight 15.5 lbs (7 kg)


Other: 
Total power 220 V (35 kVA)
Air pressure 100 psi
Machine height 117.2 in (2975 mm)
Floorspace (L x W)

162.6 x 154.9 in (4130 x 3930 mm)
Weight 12500 lbs (5700 kg)

Specifications subject to change.