GL5 Cylindrical Grinder

GL5

Straight or angle head production grinder.

 Max Part Size: 
Swing 12.6 in (320 mm)
Center distance (GL5A/P-32II) 12.6 in (320 mm)
Center distance (GL5A/P-63II) 24.8 in (630 mm)
Max grinding diameter ø8.6 in (ø220 mm)
Max load between centers 330 lb (150 kg)

External Grinding Wheel: 
Wheel spindle bearing Hybrid-type Toyoda STAT® bearing
Wheel drive motor 15 hp (11 kw)
Max wheel size (OD x ID) ø24 x 12 in (ø610 x 304.8 mm)
Max wheel width (GL5A's) 4.9 in (125 mm)
Max wheel width (GL5P's) 4.9 in (125 mm)
Wheel surface speed 11,800 sfpm (60 m/sec)

Wheelhead: 
Wheelhead rapid feed (infeed) 787 ipm (20 m/min)
Wheelhead feed drive motor 1.8 hp (1.3 kw) brushless servo

Control:
Toyoda GC32G1

Table: 
Table rapid feed 787 ipm (20 m/min)
Table feed drive motor 2.4 hp (1.8 kw) brushless servo

Workhead: 
Workhead center taper MT #4
Workhead spindle speed (variable) 16 - 500 rpm
Workhead drive motor 2.0 hp (1.5 kw) brushless servo

Footstock: 
Footstock center taper MT #4
Footstock max. center retraction 2.36 in (60 mm)

Machine Size: 
Floorspace (GL5A/P-32II) 77 x 92 in (1,956 x 2,337 mm)
Floorspace (GL5A/P-63II) 108 x 92 in (2,743 x 2,337 mm)
Net weight (GL5A/P-32II) 9,900 lb (4,491 kg)
Net weight (GL5AP-63II) 12,100 lb (5,488 kg)

Specifications subject to change.