GL6 Cylindrical Grinder

GL6

Straight or angle head production grinder.

 Max Part Size: 
Swing 15.7 in (400 mm)
Center distance (GL6A/P-32) 12.6 in (320 mm)
Center distance (GL6A/P-63) 24.8 in (630 mm)
Center distance (GL6A/P-100) 39.4 in (1,000 mm)
Max grinding diameter ø11.8 in (ø300 mm)
Max load between centers 660 lb (300 kg)

External Grinding Wheel: 
Wheel spindle bearing Hybrid-type Toyoda STAT® bearing
Wheel drive motor 20 hp (15 kw)
Max wheel size (OD x ID) ø24 x 12 in (ø610 x 304.8 mm)
Max wheel width 6.3 in (160 mm)
Wheel surface speed 12,000 sfpm (60 m/sec)

 Wheelhead: 
Wheelhead rapid feed (infeed) 590.5 ipm (15 m/min)
Wheelhead feed drive motor 3 hp (2.2 kw)
Wheelhead min. move increment 0.000010 in (0.0001 mm)

Control:
Toyoda GC32G1

Table: 
Table rapid feed 590.5 ipm (15 m/min)
Table feed drive motor 3.9 hp (2.9 kw)
Table min. move increment 0.0000039 in (0.0001 mm)

Workhead: 
Workhead type Dead spindle
Workhead center taper MT #5
Workhead spindle speed (variable) 32 - 630 rpm
Workhead drive motor 2 hp (1.5 kw)

Footstock: 
Footstock center taper MT #5
Footstock max. center retraction 2.4 in (60 mm)

Machine Size: 
Floorspace (GL6A/P-32) 118 x 154 in (3,000 x 3,900 mm)
Floorspace (GL6A/P-63) 126 x 154 in (3,200 x 3,900 mm)
Floorspace (GL6A/P-100) 162 x 154 in (4,095 x 3,900 mm)
Net weight (GL6A/P-32) 17,160 lb (7,800 kg)
Net weight (GL6A/P-63) 18,700 lb (8,500 kg)
Net weight (GL6A/P-100) 20,240 lb (9,200 kg)