Prices Starting at $174,800 (Cat#40) and $182,000(Cat#50)
	Spindle Motor	CAT40 25 HP CAT50 30 HP	15-25 HP
	Spindle Chiller	Standard	Option
	Guideways	Heavy Box Guideways	Linear Guideways
	ATC	CAT40 32T CAT50 30T	16-24 Standard
	4th Axis Prep	Standard	Option or N/A
	Coolant Through Spindle	Standard	Option or N/A
	Chip Conveyor	Standard	Option
	Chip Washdown	Standard	Option
	Dual Chip Augers	Standard	Option
	CE Safety Specification	Standard	Option

Specifications

X travel (left & right)	59.1 in (1,500 mm)
Y travel (in & out)	25.6 in (650 mm)
Z travel (up & down)	23.6 in (600 mm)
Table size (X direction)	65.0 in (1,650 mm)
Table size (Y direction)	25.6 in (650 mm)
Table load capacity	3,306 lbs (1,500 kg)
Spindle motor	CT40 - 25 hp (18.5 kw) / 20 hp (15kw) CT50 - 30 hp (22 kw) / 25 hp (18.5 kw)
Spindle speed (#40 / #50)	15 - 8,000 rpm / 15 - 6,000 rpm
Spindle Options	Geared CAT40 8,000 rpm Geared CAT50 6,000 rpm
Spindle output torques	339 ft-lb (460 Nm) 140 ft-lb (555 Nm)
Spindle taper	CAT 50 / CAT 40
Rapid feedrate X, Y axes	945 ipm (24 m/min)
Rapid feedrate Z axis	708 ipm (18 m/min)
Maximum Cutting Feedrate	708 ipm (18 m/min)
Tool Magazine Capacity - CT40	32 Standard (40 Optional)
Tool Magazine Capacity - CT50	30 Standard (40 Optional)
Machine size: L x W x H (including operator control and standard magazine)	205.4 in x 160.2 in x 115.7 in (5,218 mm x 4,068 mm x 2,940 mm)
Machine Training, Set-Up and Warranty Labor provided by the Toyoda Distributor

Accuracy

Positioning Accuracy	±.005 (±.0002)
Repeatability	±.003 (±.0001)

Power and Coolant

Power Required	3 Phase ±10% 220 v (35 kVA)
Air Pressure	100 psi
Power Supply Frequency	50 / 60 Hz
Control Voltage	24 v
Coolant Tank Capacity	270 gal
Flood Coolant (Gallons per Minute)	20 gal
CTS Coolant (7 Gallons per Minute	300 psi
Note: Machines are 220V / 3 Phase / 60Hz. Any other voltage may require a transformer (not included)