UX570 5-Axis | Vertical Machining Center

UG550 5 Axis Gantry Type Machining Center | The UG550 is Toyoda's smallest Vertical Machining Center.

The UX550 5-Axis Vertical Machining Center.

Stroke:

Axis travel X (head movement)	21.7 in (550 mm)
Axis travel Y (gantry movement)	27.6 in (700 mm)
Axis travel Z (headstock movement)	19.7 in (500 mm)
Disstance between spindle nose and table top	3.9 - 23.6 in (100 -600 mm)

Spindle:

Speed speed	0 -1400 rpm (HSK opt 22000)
Spindle Power	36.2/48.3 hp (27/36 kW)
Spindle bearing bore diameter	2.75 in (70 mm)
Max. torue at spindle	84.8 ft-lb (115)
Spindle taper	CAT 40
Tool clamping force	1984 lbs (9000 N)

Table:

Pallet size	21.7 x 21.7 in (550 x 550 mm)
Max. table load	1102 lbs (500 kg)
Swiveling range on the A axis	±30/±120 degrees
Rotating range of the C axis (table)	360 degrees
Swiveling speed of the A axis	25 rpm
Rotating speed of the C axis	100 rpm
Max. torque of the A axis	4602 ft-lb (6240 kg)
Max. torque of the C axis DD motor	1719 ft-lb (2330 Nm)
Rated torque of the A axis	1275 ft-lb (1728 Nm)
Rated torque of the C axis DD motor	929 ft-lb (1260 Nm)
Brake torque of the A axis	3688 ft-lb (5000 Nm)
Brake toque of the C axis (table)	1228 ft-lb (1800 Nm)

Control:

Heidenhain TNCi 530 or
Fanuc 21i 5A

Tool Magazine:

Standard storage capacity	30 (60 opt)
Max. tool diamenter/adjacent pocket emty	3.5/5.1 in (90/130 mm)
Tool change time (tool to tool)	6 sec
Max. tool lenght	11.8 in (300 mm)
Max. tool weight	17.6 lbs (8 kg)

Feed:

Rapid traverse (X, Y and Z)	1889 ipm (48 m/min)
Cutting feedrate	.04 - 394 ipm (1 - 1000 mm/min)

Accuracy:

Positioning accuracy X, Y and Z axes (JIS)	± 0.0004 in (0.01 mm)
Indexing axial positioning accuracy	± 0.002 degrees
Indexing axial repeatability	± 0.0015 degrees
Repeatability in all axes (JIS)	± 0.0001 (± 0.003)

Machine Size:

Specifications subject to change.