| Axis travel X (head movement) |
31.5 in (800 mm) |
| Axis travel Y (gantry movement) |
37.4 in (950 mm) |
| Axis travel Z (headstock movement) |
25.6 in (650 mm) |
| Disstance between spindle nose and table top |
3.9 - 29.5 in (100 -750 mm) |
| Speed speed |
0 -1400 rpm (HSK opt 22000) |
| Spindle Power |
36.2/48.3 hp (27/36 kW) |
| Spindle bearing bore diameter |
2.75 in (70 mm) |
| Max. torue at spindle |
84.8 ft-lb (115) |
| Spindle taper |
CAT 40 |
| Tool clamping force |
1984 lbs (9000 N) |
| Pallet size |
31.5 x 31.5 in (800 x 800 mm) |
| Max. table load |
1984 lbs (900 kg) |
| Swiveling range on the A axis |
±30/±120 degrees |
| Rotating range of the C axis (table) |
360 degrees |
| Swiveling speed of the A axis |
25 rpm |
| Rotating speed of the C axis |
100 rpm |
| Max. torque of the A axis |
5664 ft-lb (7680 Nm) |
| Max. torque of the C axis DD motor |
2449 ft-lb (3320 Nm) |
| Rated torque of the A axis |
1443 ft-lb (1956 Nm) |
| Rated torque of the C axis DD motor |
1328 ft-lb (1800 Nm) |
| Brake torque of the A axis |
3688 ft-lb (5000 Nm) |
| Brake toque of the C axis (table) |
2581 ft-lb (3500 Nm) |
| Control: |
Heidenhain TNCi 530 or
Fanuc 21i 5A
|
| Standard storage capacity |
30 (60 opt) |
| Max. tool diamenter/adjacent pocket emty |
3.5/5.1 in (90/130 mm) |
| Tool change time (tool to tool) |
6 sec |
| Max. tool lenght |
11.8 in (300 mm) |
| Max. tool weight |
17.6 lbs (8 kg) |
| Rapid traverse (X, Y and Z) |
1889 ipm (48 m/min) |
| Cutting feedrate |
.04 - 394 ipm (1 - 1000 mm/min) |
| Positioning accuracy X, Y and Z axes (JIS) |
± 0.0004 in (0.01 mm) |
| Indexing axial positioning accuracy |
± 0.002 degrees |
| Indexing axial repeatability |
± 0.0015 degrees |
| Repeatability in all axes (JIS) |
± 0.0001 (± 0.003) |
| Machine height |
1143.8 in (3650 mm) |
| Floorspace |
173.2 x 128.0 in (4400 x 3250 mm) |
| Net weight |
33069 lb (15000 kg) |
Specifications subject to change.
| ©Toyoda Machinery USA | (847) 253-0340